Banded V Belts
1. Permanent Matched Set.
2. No lateral whip, spin or jump-off.
3. Deep pulley grooves are not required even on horizontal drives.
4. Heat and Oil resistant.
Construction
1. Tie-band.
2. Rubber impregnated cross woven cotton-polyester fabric.
3. Cushion rubber.
4. Low Stretch high modulous adhesive activated polyester cable cord.
5. Compression rubber.
| Type | Top width of one belt, A, (mm) | Height B(mm) | Angle,q (0) | Pitch between two belts, e,mm | belt inside Lenght (inch) |
| A/HA | 13.0 | 10.0 | 40 | 15.88 | 72-160 |
| A/HB | 17.0 | 13.0 | 40 | 19.05 | 80-400 |
| C/HC | 22.0 | 16.0 | 40 | 22.50 | 85-440 |
| Belt Effective Length (in inch) | |||||
| 3V/H3V | 9.7 | 10.0 | 40 | 10.30 | 72-160 |
| 5V/H5V | 15.8 | 16.0 | 40 | 17.50 | 80-440 |
| 8V/H8V | 25.4 | 25.0 | 40 | 28.60 | 100-550 |
| Belt Effective Length (mm) | |||||
| HSPC | 22.0 | 20.0 | 40 | 25.50 | 2800-7000 |
| Size Marking on Belts | |||||||
 |
 |
||||||
| Home Profile Product SitemapFeedbackEmail Contact us | |
Copyright © 2009 Windsor . All Rights Reserved. |