Cut Edge Moulded Cogged Belts
Features:-
1.Cut edge moulded cogged V-belts have a precision cogged profile base which is designed for uniform stress distribution and superior heat dissipation.2.Their construction permits greater flexibility and a higher kilowatt capacity for exceptional performance on small diameter pulleys using FHP, Classical, Wedge and Narrow section drives.The robust construction is specially designed to fit the pulley grooves exactly, which allows maximum wedging action.3.The belts are built with low stretch-high modulous stiff polyester tensile members to resist fatigue and shock loads. The cord and polychloroprene rubber are bonded to prevent separation and reinforcement layers on both sides of the tensile member improve cord stability. All belts are oil & heat resistant and static conducting.
Construction:
2. Low Stretch high modulous adhesive activated stiff polyester cable cord.
3. Moulded cogs for better flexibility.
4. Fibre filled Polychloroprene compression rubber
| Dimension & Standard Sizes | ||||
| Belt Type | TopWidth, a(mm) | Height b (mm) | Angle q (o) | Belt Outside Length in lnch |
| 3LX | 10.0 | 6.0 | 40 | 20 -157 |
| 4LX | 13.0 | 8.0 | 40 | 20 -157 |
| 5LX | 16.7 | 9.0 | 40 | 20 -157 |
| Belt Type | TopWidth, a(mm) | Height b (mm) | Angle q (o) ln inches | Belt Outside Length in lnch |
| ZX / X10 | 10.0 | 6.0 | 40 | 20 - 157 |
| AX / X13 | 13.0 | 8.0 | 40 | 20 - 157 |
| BX / X17 | 17.0 | 11.0 | 40 | 22 - 157 |
| CX / X22 | 22.0 | 14.0 | 40 | 30 - 157 |
| DX / X32 | 32.0 | 20.0 | 40 | 30 - 157 |
| Dimension & Standard Sizes | ||||
| Belt Type | 15 AX TopWidth, a(mm) | Height b (mm) | Angle q (o) | Belt Pitch Length in mm. |
| XPZ | 9.7 | 8.0 | 40 | 600 to 1900 |
| XPA | 12.7 | 10.0 | 40 | 600 to 4000 |
| XPB | 16.3 | 13.0 | 40 | 600 to 4000 |
| XPC | 22.7 | 18.0 | 40 | 1000 to 4000 |
| Belt Type | TopWidth, a(mm) | Height b (mm) | Angle q (o) | Belt Effective Length ln lnches |
| 3VX | 9.7 | 8.0 | 40 | 24 to 157 |
| 5VX | 15.9 | 13.5 | 40 | 31.5 to 157 |
| Belt Type | Top Width, a(mm) | Height b (mm) | Angle q (o) | Belt Effective Length ln mm |
| 10 AX | 9.7 | 8 | 40 | 495 to 4000 |
| 13 AX | 12.7 | 10 | 40 | 500 to 4000 |
| 15 AX | 15.8 | 10 | 40 | 515 to 4000 |
| 17 AX | 17.5 | 11 | 40 | 515 to 4000 |
| 22 AX | 22.3 | 11 | 40 | 600 to 4000 |
| 25 AX | 25 | 14 | 40 | 700 to 4000 |
| AVX 10 | 10 | 8 | 38 | 495 to 4000 |
| AVX 13 | 13 | 10 | 38 | 500 to 4000 |
| VX - 10 | 10 | 8 | 38 | 495 to 4000 |
| VX - 13 | 12.5 | 8.7 | 38 | 500 to 4000 |
| VX - 15 | 16.5 | 11 | 36 | 515 to 4000 |
| VX - 20 | 22 | 13 | 36 | 600 to 4000 |
| AVX - 13 | 13.5 | 8.7 | 36 | 500 to 4000 |
| Pitch Length in | ||||
| HAX | 13 | 7 | 40 | 650 to 4200 |
| HBX | 17 | 9 | 40 | 650 to 4200 |
| HCX | 22 | 11 | 40 | 650 to 4200 |
| Home Profile Product SitemapFeedbackEmail Contact us | |
Copyright © 2009 Windsor . All Rights Reserved. |